ASI294MC-Pro es una cámara que sobre el papel es bastante mejor que la ASI1600MC-Pro. Pero tiene un problema importante que por ahora ZWO no ha resuelto.
Mucho cuidado con la ASI 294 MC-Pro
El contacto entre la refrigeración y el sensor no es directo, como es habitual en el resto de modelos. Esto tiene como consecuencia que las lecturas de temperatura no son precisas y a mayor delta mayor error de lectura en la temperatura. Además tiene un DarkNoise un poco alto: 0.046e a -10ºC.
ZWO recomienda usarla en tomas cortas, hacer los Darks en cada sesión y como mucho a -10º, al menos hasta que lancen una revisión con el diseño mejorado.
En el Q&A de ZWO sobre la 294MC-Pro se habla de este tema:
https://astronomy-imaging-camera.com/product/asi294mc-pro-color
quotes
I think ASI071 is a good choise. It is very good for long precise exposures and wider FOV. ASI294 is better for short exposure and Live stacking(EAA).
We have some suggestion about use ASI294MC Pro:
1. take calibrate frames(dark/bias) in same night after you finished all light frames, same or similar environment temp will keep better consistancy. If take dark in another day, please make sure the environment temp is not too much higher.
2. Don’t let the cooling power reach 90%-100%, we think about 50%-75% will be a wise choice, which means don’t turn the target temp too low than ambient temp.
3. Preprocessing in Pixinsight will be a good choice, pixinsight have many useful parameters and algorithm to calibrate and stack the images quite well.
I think in the post, Andy finally took some great pictures. It’s some tricks in every cameras, I think everybody need some time to know about their camera then use it well.
1600 is better for long exposure than 294 as the dark current is lower
the dark current of 071 is better than 294
so 071 is more suitable for very long exposure
Hello ZWO
Any plans (if it is even possible) to improve the cooling on this camera so that darks don’t need to be taken with each imaging session? I have seen a live demo of this camera and it is quite impressive. I am looking at using this camera at doing some lucky style imaging (not EAA) on some large aperture telescopes. My club has an 18 inch Newt and the Museum I volunteer for has a 36 inch RC.
-----------------------------
Yes, we will improve it. Thanks for mention that!
El foro de CloudyNights tiene largos hilos hablando de este tema. Sus usuarios están mostrando fotos con muy buenos resultados pero con muchas limitaciones. Quien esté interesado en esta cámara le recomiendo buscar información en ese foro.
Es un sensor con muchísima sensibilidad con un DRStop muy alto, buen fullwell, 14bits y bajo ruido, pero no se le puede sacar todo el potencial por este problema.
ZWO posiblemente lanzará una revisión mejorada, sobre todo después de ver lo que está presentando QHY en su foro, donde están mostrando curvas de temperatura y DarkNoise muchísimo mejores: 0,009e a -10ºC y 0,005e a -20ºC. QHY se ha retrasado en lanzar este modelo por esos problemas y parece que ya lo tienen solucionado.
https://qhyccd.com/bbs/index.php?topic=6589.0