Update: all pre-build camera's are now sold - if you want one of these camera mod's I can build to order (5-7 day lead time) before dispatch, also available is the parallel port SC2 mod please ask. Brand New philips SPC880NC/SPC900NC webcamFirmware modified from SPC880NC to SPC900NC and Enchanced CCD settings for astrophotography Modded with the Amp-on/off + Long exposure Frame transfer 1&2 (SC1.5) and built in serial to USB adapter (Silicon Labs cp2102), should fit any telescope with 1.25" eyepiece holderThe Amp on/off is same as the circuit used in SC2 mod, Frame transfer 1&2/LX pin = RTS and Amp on/off pin = DTR, markings next to small switch are N=Normal mode and L=Long Exposure mode. Also Note: The white LED and Microphone have been removed from the circuit board on the camera as they are of no use to anyone into astronomy.The camera has a CCD chip that is very sensitive and thus ideal for low light situations, such as astrophotography.Interface Type - 2x USBAdaptor - Standard 1.25"Sensor - SONY ICX098QB CCDStill Image Capture Resolution - 1280 x 960Video Capture Resolution - 640 x 480Digital Video Capture Speed - 30 frames per secondInterpolated snapshot res. - 1.3 MPOperating system - Windows 7 , Vista , XPMax. frame rate - 30 fpsWhite balance - 2600 – 7600 kMin. illuminance - less than 1 luxWorks best with a frame rate of 5-20 frames per second, best free software is wxAstroCaptureTested with long exposure of 120 seconds in wxAstroCapture although you could do even longer assuming you have a good mount and motor drives or a goto telescope. Tested working with Windows 7 and XP will include drivers on CD, also works with SharpCap, MaximDL 4/5, PHDGuiding, GuideDog. I will also include windows based software for Image capture, Image stacking and camera control[/size]
Recomendando desde 2009 a: 
Todos los Temas Actualizados recientes 
Autor
